Here you can find out how to use the exterior shower of your Camper Cabin. There are slight differences between the individual models, so check which one you are driving and then select the correct instructions from the dropdown menus:
- Connect the shower hose and water connector at the rear of the vehicle:
- Activate the water pump on the control panel and make sure you have enough water in the fresh water tank :
- Press the silver lever on the shower head to activate the water flow.
When you are finished, deactivate the water pump, press the silver button next to the hose connection and carefully pull off the hose.
If no water flows, see Fresh water and waste water.
You can find the video explanation here:
The shower hose is located in the compartment at the top left in the kitchen.
- Make sure you have enough water in the fresh water tank
- Insert the hose into the opening under the rear cabinet.
- Switch on the pump (small lever next to the connection)
- The shower can be hung in the loop on the tailgate.
You can find a visual explanation here:
If no water flows, see Fresh water and waste water
The shower hose is located in the compartment at the top left in the kitchen.
- Make sure you have enough water in the fresh water tank
- Insert the hose into the opening under the rear cabinet.
- Switch on the pump (small lever next to the connection)
- The shower can be hung in the loop on the tailgate.
You can find a visual explanation here:
If no water flows, see Fresh water and waste water