To heat up the water and use the shower in the Horizon Hopper you need to:
- Check the level of the camping battery:
- Check the fresh water level on the board unit. It should be at least 50%.
- Check that you have enough Diesel in the tank.
- Go to the heating control above the back seat:
- Select the water symbol:
- Adjust the temperature by sliding the finger over the inner ring (red/blue)
- wait about 20 minutes before the water is heated.
- Turn on the water pump at the board unit:
- Use the shower curtain to prevent water damage by closing it in front of the door with the press studs:
- The outdoor shower is located in the trunk area, where you also find the hose. Turn on the water pump for the outdoor shower before use:
- After your shower turn off the water pump and the water heater.
Watch this video for a more detailed explanation: