Find out how to use the external shower of your Camper Cabin. There is a slight difference between models, so check which one you are driving and then, select the correct instructions from the drop down menus:
- Remove the shower hose from the cupboard at the back and connect it to the hose coupling on the outlet below it:
- Activate the water pump using the toggle on the "water" section on the board computer and make sure you have enough water in the fresh water tank:
- Press the silver lever on the shower head to activate the water flow.
Once you are done, deactivate the water pump and press the silver button next to the hose connection and pull carefully from the hose.
If no water is running, see fresh water and waste water.
You can find the video explanation here:
The shower hose is in the compartment at the top left of the kitchen.
- Make sure you have enough water in the fresh water tank.
- Insert the hose into the opening under the rear cupboard.
- Turn on the pump (small lever next to the connection).
Once you are done, deactivate the water pump and press the silver button next to the hose connection and pull carefully from the hose.
A visual explanation can be found here:
If no water is running, see fresh water and waste water.
The shower hose is in the compartment at the top left of the kitchen.
- Make sure you have enough water in the fresh water tank.
- Insert the hose into the opening under the rear cupboard.
- Turn on the pump (small lever next to the connection).
Once you are done, deactivate the water pump and press the silver button next to the hose connection and pull carefully from the hose.
A visual explanation can be found here:
If no water is running, see fresh water and waste water.