The outside shower is located in the rear cabinet under the first board.
Prepare outdoor shower
- Open the cabinet door in the driver's side of the trunk:
- Remove both bottom plates:
- Remove the shower hose from the holder:
- Insert the shower hose connector into the marked connector and push it in until it clicks into place:
- Activate the water pump using the black toggle switch. Then press the white lever on the shower head to shower:
- To disconnect, press in the outer gold ring of the shower connection (on the vehicle) and pull out the hose:
Troubleshooting
- There is no running water even when the water pump is activated? See here!
Watch the video: