Skip to main content

🔄 Changing an empty gas bottle - Road House (Hymer Ayers Rock)

To change the gas bottle (11 kg), several steps must be followed to ensure safe handling:
  1. Set the shut-off valves in the drawer in the kitchen vertically to close them.
    JPF_5412.JPG
  2. Go to the boot and open the gas compartment on the left-hand side:
    JPF_5541.JPG
  3. If the bottle is empty, close it anyway at the brass-coloured valve.
    20210309MST_0182.JPG

  4. Unscrew the connector from the gas bottle by hand (note: left-hand thread).
  5. Loosen the straps around the gas bottle.
  6. Take the bottle out of the compartment and replace it with a full one.
  7. Securely fasten the bottle again with the straps.
  8. Screw the connector onto the gas bottle by hand (attention: left-hand thread).

Attention

  • Do not use any tools to screw the connector onto the gas bottle, otherwise it may not be possible to unscrew it!
  • Be sure to close the shut-off cocks and the gas bottles while driving!

  • Please also note that for safety reasons the gas compartment must not be used as a storage space.

Please note that bottles purchased outside Germany may require an adapter. Here you will find all possible adapters and information about gas suppliers abroad.

Was this article helpful?
4 out of 7 found this helpful

Articles in this section

See more