The taps in the kitchen and bathroom work with water from the fresh water tank. Make sure you have enough water in the tank. A pump that runs without water can break down!Â
You can check the levels of both tanks in the on-board computer:
To activate the water pump, go to the trip computer and press the button with the water tap symbol. When the light next to the button lights up, it means that the water pump is switched on. Now simply open the tap to let the water flow.
When you no longer need water, turn the pump off again. A pump that runs all the time could break down.
The used water flows into the waste water tank. Remember to empty the grey water tank when the on-board unit indicates that it is full.
If you want to do a warm rinse, see how to do it here.
Please note the following
- The sink is not suitable for washing up coarse food residues, as this may cause odours. In addition, the drain can easily become clogged.
- Close the taps carefully so that the pump does not run continuously.
- If odours develop, empty the waste water tank more often and rinse with baking soda and a little vinegar or biodegradable drain cleaner.
Troubleshooting
Is water leaking from under the car or is there no water flowing at all? Possible solutions are summarized below in the article 💧 Fresh water and waste water / grey water - Camper Castle (Knaus Sky Wave)