The taps in the kitchen and bathroom work with water from the freshwater tank. Make sure you have enough water in the tank. A pump that runs without water can break down!
You can check the water level of the tank in the on-board computer:
Make sure the water pump is switched on from the on-board computer for water to run:
To use the washbasins, lift the glass cover in the kitchen and tilt the tap upwards.
When you have finished, make sure you close the water tap and switch off the pump again - otherwise the pump could still be activated even though no water is flowing.
The used water flows into the wastewater tank. Remember to empty the wastewater tank when the on-board computer indicates that it is full.
If you want to do a warm rinse, see how to do it here.
Please note the following
- The sink is not suitable for washing up coarse food residues, as this may cause odours. In addition, the drain can easily become clogged.
- Close the taps carefully so that the pump does not run continuously.
- If odours develop, empty the wastewater tank more often and rinse with baking soda and a little vinegar or biodegradable drain cleaner.
Troubleshooting
Is water leaking from under the car or is there no water flowing at all? Possible solutions are summarized below in the article Freshwater and wastewater - Road House (Weinsberg CaraTour 540)