The taps in the kitchen and bathroom work with water from the fresh water tank. Make sure you have enough water in the tank. A pump that runs without water can break down!
You can check the levels of both tanks in the on-board computer. Press the bottom left and the levels of waste water and fresh water will light up on the screen:
To use the water, switch on the water pump on the on-board computer (symbol with a tap, under the on/off button). When it is on, it will light up. Remember to switch it off again when you are no longer using it.
The used water flows into the waste water tank. Remember to empty the grey water tank when the on-board unit indicates that it is full.
Click here to go directly to the explanatory video:
If you want to do a warm rinse, see how to do it here.
Please note the following
- The sink is not suitable for washing up coarse food scraps, as this can cause odours to develop. In addition, the drain can easily clog.
- Close the taps carefully so that the pump does not run continuously.
- If odours develop, empty the waste water tank more often and rinse with biodegradable drain cleaner or vinegar and baking soda
Troubleshooting
Is water leaking from under the car, is there no water flowing at all or is the pump running continuously? We have summarised possible solutions for you at the end of this article Freshwater and waste water - Road House (Knaus Boxlife)