Skip to main content

Folding the rear seat - Camper Cabin Deluxe (Ford Nugget Plus)

Find out how to convert the rear bench seat of your Camper Cabin into a bed:

Folding the rear bench seat

  1. Push the driver and passenger seats forward (turn them if necessary).
  2. Sit on the back seat and push the lever at the bottom left of the bench to the left to slide it all the way forward.

    Loosen the belts!
  3. Fold up the upholstery under the kitchen unit and let the bar snap into the rail on the back seat.
  4. Push the right lever at the front of the rear bench to the left and lift the seat cushion to the front edge.
  5. Pull the seat cushion and backrest forwards (the surfaces are almost vertical).
  6. Then lower both surfaces flat at the same time to create a reclining surface.

Click here to go directly to the explanatory video:

Was this article helpful?
3 out of 4 found this helpful

Articles in this section

See more
Powered by Zendesk